● standard solution
● conveyor with side edges h 80 mm
● solution which allows the following components to be installed over them:

– Polycarbonate or Aluminium made covers
– cooling tunnels with electric fans

● conveyor with side edges h 40 mm
● solution proposed when side panels are needed even if the conveyor height must be limited

● with operators working directly above the conveyor
● when pieces are wider than the conveyor and they are picked up before they reach the gearmotor unit

● conveyor with side edges h 80 mm Teflon-coated
● solution proposed when pieces are extremely delicate and could be damaged even with a slight contact with the Aluminium made standard edges

● conveyor with side edges h 80 mm and additional side protections
● solution proposed when products must not come into contact with non-FDA surfaces or to avoid small pieces getting stuck between side panels and the conveyor profile

● to convey pieces in large size and/or quantities
● possible shim strips unsure side sealing between side panels and conveyor belt

● conveyor with belt equipped with lateral sponda flex
● solution proposed to avoid small pieces getting stuck between side panels and the conveyor profile

● conveyor with Polyzene side edges adjustable both in width and height
● solution proposed to convey and guide containers and/or pieces of different sizes

● conveyor with central dividers adjustable both in width and height
● solution proposed to convey pieces which should not be mixed