● This mixer called BLEND is suitable for mixing small quantities of product
● It is therefore suitable when the product batches are not very large
● The mixing principle is the following: on request, the screw is enclosed in a tube and the material is fed from the top. The mixed product is usually taken by means of a suction nozzle and fed into one of the two cone-shaped side tubes of the container. The gate valve for rapid unloading and/or cleaning inside the mixer hopper and the hopper lid are protected by micro switches

TECHNICAL FEATURES

● Mixer realized in varnished FE (as an option in INOX 304)
● Capacity of the mixer 240 litres
● Mixer screw rotation speed 200 per minute
● Power of the transmission group 0,75 kW
● Mixer standing on rotating wheels (two with brake)
● Mixer complete with Genius Control Panel having the following functions:
● Manual: march/stop through plungers
● Automatic: functioning for the established time of run
● Safety: circuit to stop the mixer’s functioning if the cap is raised or to let the mixer run with raised cap
● Standard motor supply voltage 400V/50 Hz

● BIG BLEND mixer is a solution that has always been used for mixing plastic material granules. It consists of an outer frame made of painted sheet metal and an internal screw (optional in BIG BLEND 2/3 and 4) inside a tube for mixing the contents. The material to be mixed is fed into the loading hopper, the screw receives it from below and carries it upwards releasing it on top, spreading it inside the mixer body with a radius of 360°. After about 15/20 minutes, the material is perfectly mixed
● The BIG BLEND includes the control panel, with the Start and Stop functions and time settings

● The inspection hatches for the screw conveyor and mixer are protected by safety microswitches

TECHNICAL FEATURES

● The mixed material outlet tube is complete with gate valve
● Screw is enclosed in a tube along its entire length
● When the inspection hatch is open, big blend will not run
● Both doors have a pair of safety latches and microswitches for protection
● The power cable and cables of the micro switches are protected in a cable duct