boxed
color
http://www.romatomove.com/wp-content/themes/anya-installable/
http://www.romatomove.com/
#A9CA6E
style4

we control

    genius control panel

    PROGRAMMES

    MANUAL For manual operation
    PAUSE-WORK Sets work and pause timing in hours, minutes and seconds.
    PULSE For pulse operation
    FEEDER Starts up the conveyor for a time equal to the duration of the signal coming from the robot. At the end of the feed signal, the control panel stops the conveyor and waits for the next signal.
    CONTINUOUS Like the MANUAL programme, but it allows managing a dry contact generally received from a metal detector antenna that stops the motor until automatic or manual reset.

    OTHER FUNCTIONS

    GF1/A main function MACHINE STATUS: the relay is triggered when the START command is sent to the control panel; idle status is triggered by an alarm or in the case of a STOP command.
    GF1/B secondary function (For PULSE and FEEDER only) the relay is triggered by the tripping of photo cell FC1; idle status is triggered when the photocell is released. (For CONTINUOUS only) the relay is triggered automatically or manually (depending on the userACK setting) to send a reset to th e active metal detector;it automatically returns to idle status when the metal detector signal is emitted.
    GF2/A main function ALARM: the relay is triggered when a stop alarm is activated; idle status is resumed when the alarm is reset.
    GF2/B secondary function The relay is triggered by the tripping of photocell FC2; idle status is resumed when the photocell is released.
    GF3/A main function MOTOR ROTATION: the relay is triggered when the belt starts moving; idle status is resumed when the belt stops
    GF2/B secondary function The relay is triggered by the tripping of photocell FC3; idle status is triggered when the photocell is released. The relay on the logic board can replicate the function set on one of three relays present on the expansion (including without expansion). In this case, the corresponding expansion relay (if any) will continue to perform the set function
    MAIN SPECIFICATIONS
    • Maximum power: 0.75 kW
    • Control panel complete with three-phase inverter allows speed control
    • Rating: IP 65
    paged
    Loading posts...
    none
    #acaaaa
    on
    fadeInDown
    loading
    #acaaaa
    off